Home

Which of the following is a solid solution

Question: Which Of The Following Particulate Representations Is A Solid Solution? (Select Only One.) Choose One: Ο Α. OB. Mercury Copper Zinc Brass O C. Saline Ос. Saline O D. Glycine O E. Platinu Solid solution, mixture of two crystalline solids that coexist as a new crystalline solid, or crystal lattice. The mixing can be accomplished by combining the two solids when they have been melted into liquids at high temperatures and then cooling the result to form the new solid or by depositing vapours of the starting materials onto substrates to form thin films In solid solution a solid is the solvent while solute can be either solid, liquid or gas. Example: Solid in solid solution: Alloys are mixture of two or more metals or a metals and non metals. = Liquid in solid solution: Hydrated salt that is salt containing water of crystallization such as hydrated copper sulphate, hydrated ferrous sulphate. Which of the following are defining traits of solution? Check all that apply. A. A solution can only occur in water B. A solution has a constant compostition throughout. C. A disolved solute will not settle out or separate from the solvent in a solution. D. The physical state of a solution is always the same as the sisolved solute

Solved: Which Of The Following Particulate Representations

Which type of solution is a clear, sweetened, flavored hydroalcoholic containing water and alcohol? Which of the following dosage forms is an aqueous solution containing sucrose or sucrose substitute? Which type of dispersion is similar to an ointment but contains more solid materials? Paste The ionic solid will dissolve because the entropy of solution is large enough to outweigh the effects of the positive enthalpy of solution. The enthalpy of solution is defined as the sum of the lattice enthalpy and the hydration enthalpy. Therefore, the enthalpy of solution equals 30kJmol, which means the dissolution is an endothermic process Which of the following is not a disadvantage of liquid? a. deterioration and loss of potency occur quickly b. easier to swallow than solid dosage forms c. interactions develop owing to changes in solubility d. requires sweetening and flavoring to be palatabl Substitutional solid solution rules. For substitutional solid solutions, the Hume-Rothery rules are as follows: The atomic radius of the solute and solvent atoms must differ by no more than 15%: % = % %. The crystal structures of solute and solvent must be similar.; Complete solubility occurs when the solvent and solute have the same valency. A metal is more likely to dissolve a metal of.

Copper dissolved in Gold is a solid solution in which a solid is dissolved in solid. Hence, option B is correct. Answer verified by Toppr . Upvote (0) Was this answer helpful? Get Instant Solutions, 24x7. Fill in the following blanks with suitable words: Brine is a _____ whereas alcohol is a_____. Medium. View solution. Explain the term. These exemplars solutions are designed by experts in accordance with CBSE syllabus (2020-2021), which cover all the topics of Maths Chapter 6 of 8th standard. The chapter visualizing solid shapes is about learning different types of shapes in 2 and 3 dimensions. To master the concepts of this chapter students are advised to solve the questions. A concentrated solution has a large amount of solute dissolved in a large amount of solvent. A bottle of whiskey states that it is made up of 40% alcohol. Which one of the following statements about this whiskey is incorrect Follow Us: Examples of solids in gas solutions include hydrogen in platinum and sulfur vapor in air. In chemistry and physics, there are three states of matter, which are solid, liquid and gas. From these states seven different types of solutions can form, including gas solutions, which involve the dissolving of gas particles into surrounding.

Solid solution chemistry Britannic

Which of the following substances is a compound? A. solid bronze (an alloy of copper and tin) B. a salt water solution C. solid iron metal (Fe) D SolutionShow Solution. If the number of atoms is N, the number of octahedral voids is 2N. Concept: Solid State Check the below NCERT MCQ Questions for Class 12 Chemistry Chapter 1 The Solid State with Answers Pdf free download. MCQ Questions for Class 12 Chemistry with Answers were prepared based on the latest exam pattern. We have provided The Solid State Class 12 Chemistry MCQs Questions with Answers to help students understand the concept very well Which of the following statements is true? A. Unsaturated solutions will not dissolve more solute. B. For most substances, the solid state is more dense than the liquid state. C. Density is not temperature dependent. D. A nonpolar solute will dissolve in a polar solvent such as water 7. Which of the following is not a technique for preparing solid samples in IR spectroscopy? a) Solids run in solution b) Mull technique c) Solid films d) Thin films. Answer: d. Explanation: Four techniques are generally used to prepare solid samples. They are: Solids run in solution, Mull technique, Solid films and pressed pellet techniques

Which Of The Following Is NOT A Factor That Determines The Degree To Which A Substitutional Solid Solution Occurs? [a] [b] [c] (d) [e] Atomic Size Crystal Structure Melting Point Valences Electronegativity. This problem has been solved! See the answer Determine which of these elements would you expect to form the following with copper: (a) A substitutional solid solution having complete solubility (b) A substitutional solid solution of incomplete solubility (c) An interstitial solid solution Engineering. Mechanical Engineering. Mechanical Engineering questions and answers. Which of the following is not a hardening mechanism? a) Hardening by strain hardening b) Solid solution hardening Oc) Grain size reduction d) Grain size increase A homogeneous mixture of substances that is in a single phase is called -. 23. A suspension is when -. 24. A colloid is a mixture in a dispersed phase where the particles are -. 25. Which factor effects the solubility of a solution? 26. While stirring, solid table salt is added to a beaker of water until no more salt will dissolve and salt.

Solution. Classify each of the following observations as a physical or a chemical change: (a) Touching a lit candle to hydrogen soap bubbles gives an explosion. (b) Heating water in a flask produces moisture on the glass. (c) Combining two colorless solutions gives a yellow solid. (d) Pouring vinegar on baking soda produces gas bubbles Which of the following is most clearly an example of a physical change?A. A solid dissolves when added to a liquidB. A solution color when something is addedC. Two liquids produce heat when mixed togetherD. A gas is released when two solutions are combine

2. A solution containing sugar and salt in water is a binary solution. 3. An example of a solid solution is alloy. 4. The difference between concentrated and dilute solution can be observed by means of colour (or) density. 5. A saturated solution contains 91 g of Glucose in 100 g of water at 25°C. 6. Fat is dissolved in the aqueous solvent. It is the process in which the most of organic matter upon heating in an oxygen free atmosphere splits through a combination of thermal cracking and condensation reactions into gaseous, liquid and solid fractions. The process typically occurs at temperatures above 430 °C (800 °F) and under pressure Calculate the mass of solute in 100 mL of solution from the molar solubility of the salt. Assume that the volume of the solution is the same as the volume of the solvent. Solution: A The dissolution equilibrium for Ca 3 (PO 4) 2 (Equation \(\ref{Eq2a}\)) is shown in the following ICE table. Because we are starting with distilled water, the.

Properties of Logarithms | College Algebra

Solution - Class 9, Is Matter Around Us Pure, Chemistr

NCERT Exemplar Class 12 Chemistry Solutions Chapter 10

11.1 The Solution Process and General Solubility ..

  1. Which one of the following is the example of solid? Synthetic gems are the examples of solid solid system. Smoke is solid in gas, coke is gas in liquid and pumice stone is gas in solid. When a solid dissolves the solid (solute) and the liquid (solvent) form a very close intimate mixture called a solution
  2. ____ 14. Which of the following does not increase the rate of dissolving a solid in water? a. raising the temperature of the water b. stirring the solution c. using larger pieces of solid d. crushing the solid ____ 15. Increasing the surface area of the solute. a. increases the rate of dissolution. b. decreases the rate of dissolution. c
  3. eral rhodochrosite (MnCO 3), Fe 2+ may substitute for Mn 2+ in its atomic site in the structure. Read Mor
  4. Many different kinds of solutions exist. For example, a solute can be a gas, a liquid or a solid. Solvents can also be gases, liquids or solids. The following figures show the microscopic behavior of several different kinds of solutions. Note that in each case, the solute particles are uniformly distributed among the solvent particles
  5. Solution: Solid is the substance having definite shape as well as definite volume. 15. A substance has neither a fixed shape nor a fixed volume. State whether it is solid, a liquid or a gas. Solution: Gas is does not have a fixed shape and fixed volume. 16. Name two gases which are supplied in compressed form in homes and hospitals. Solution

Review questions Flashcards Quizle

  1. The solute and solvent can be in any state of matter i.e. solid, liquid and gas. Solutions that are in the liquid state consist of a solid, liquid or gas dissolved in a liquid solvent. Alloys and air are examples of solid and gaseous solutions, respectively. 3. Solution Examples. The following examples illustrate solvent and solute in some.
  2. Which of the following method can be used to separate a dissolved solid from its solution? View solution During the separation of oil from water in separating funnel, the oil forms an upper layer and water forms lower layer as oil has a _________
  3. Liquid solvent and solid solvent. During the depression of freezing point in a solution, liquid solvent and solid solvent are in equilibrium. During freezing of a solution, only the solvent freezes out and the equilibrium exists between solid and liquid forms of the solvent. Vapour pressure of the solid and liquid forms must be the same at.
  4. C. use a little solid at a time to a large volume of liquid. D. cool the solid-liquid mixture. Question31: Name the process of conversion of solid to vapor Q.II. Classify each of the following mixtures as a solution, suspension, emulsion or colloidal. dispersion. 1. A glass of whole milk . 2. A glass of pop . 3. A cup of black coffee. 4.
  5. A solution X when added into sodium carbonate solution turns limewater cloudy. which of the following is solution X? answer choices . Aqueous ammonia solution. Calcium hydroxide solution. Vinegar. Magnesium nitrate solution. Tags: Question 7 . SURVEY . 45 seconds . Q. When solid Y is heated strongly, a gas that turns limewater milky is produced.
  6. A homogeneous mixture of substances that is in a single phase is called -. 23. A suspension is when -. 24. A colloid is a mixture in a dispersed phase where the particles are -. 25. Which factor effects the solubility of a solution? 26. While stirring, solid table salt is added to a beaker of water until no more salt will dissolve and salt.
  7. Sol: (b) Incineration. 10. The burning of solid waste is not recommended because. (a) It is very costly. (b) It requires a lot of space. (c) It requires modern technologies. (d) It causes several environmental issues

SOLUTION. Non-Metals can exist in solid, liquid and gaseous forms. Density: Non-metals have low densities. Lustre: Non-metals do not have lustre, except diamond and iodine crystals. Brittleness: Solid non-metals are brittle, and some non-metals are soft. Diamond (an allotrope of carbon) is an exception, which is the hardest natural substance Solution: Carbon is a solid non-metal, Bromine is a liquid non-metal and chlorine is a gaseous non-metal. 9. Name the property: Choose the solutions from among the following mixtures: Soil, Sea-water, Air, Coal, Soda-water. Solutions: Solutions are sea-water and soda-water remaining is mixtures 8. A solid substance has a high melting point, is hard, brittle, and conducts electricity when molten. This substance is probably a(n)_____ solid. A. polar molecular B. nonpolar molecular C. metallic D. ionic E. network 9. Which of the following statements regarding the solution process is incorrect? A The dissolution of barium hydroxide in water is an exothermic process. Which of the following statements is correct?A) The enthalpy of solid barium hydroxide plus pure water is less than that of the solution, at the same temperature.B) The enthalpy of solid barium hydroxide plus pure water is greater than that of the solution, at the same temperature.C) The enthalpy of solid barium hydroxide.

Chemistry II Flashcards Quizle

  1. Which of the following statements about solutions is correct? A) A solution is a homogeneous mixture. B) It is possible to have solutions in which both solute and solvent are solids. C) Solutions readily separate into solute and solvent if left undisturbed for 24 hours. D) more than one correct response; E) no correct respons
  2. g Method (PDM) schedule, the critical path is delineated by red bars, 8. Consider the differences between a time-constrained schedule and a resource-constrained schedule
  3. answer choices. There is no change in the solubility of the solid. The solubility of most solids will increase. The only factor that affects the solubility of a solid is polarity. The solubility of most solids will decrease. Tags: Question 9. SURVEY
  4. Which of the following substances will conduct electricity? A) Methanol B) Aqueous KCI C) NaCl in its solid form D) Sugar solution. Which of the following substances will conduct electricity? A) Methanol B) Aqueous KCI C) NaCl in its solid form D) Sugar solution. Categories English
  5. Explore numerous MCQ Questions of Visualising Solid Shapes Class 8 with answers provided with detailed solutions by looking below. Question 1. Which of the following statements is false? (a) A sphere has one flat surface. (b) A cone has one flat face. (c) A cylinder has two circular faces. (d) A sphere has one curved face. Answe
  6. The solution is titrated with KOH, and it is found that 23.4 mL of a 0.1112 M KOH solution is required to reach the equivalence point. What was the concentration of the original HBr solution? (5 pts.) 2. I want to dilute a 15.0 mL sample of a 2.00 M solution of NaNO3 so that the new solution has a molarity of 0.00200 mol/L of NaNO3

Chapter 3 Review Questions Flashcards Quizle

  1. A sample of liquid octane in equilibrium with its vapor in a closed 1.0-L container has a vapor pressure of 50.0 torr at 45°C. The container's volume is increased to 2.0 L at constant temperature and the liquid/vapor equilibrium is reestablished
  2. Which one of the following statements about standard states is incorrect? a. The standard state of an aqueous solute is a saturated solution in water. b. The standard state of a solid compound is the pure solid. c. The standard state of a gaseous compound is the gas at a pressure of 1 atmosphere d
  3. 38°C = 273 + 38 = 311 K. 66°C = 273 + 66 = 339 K. 7. Choose the correct statement of the following. (a) Conversion of solid into vapours without passing through the liquid state is called vapourisation. (b) Conversion of vapours into solid without passing through the liquid state is called sublimation. (c) Conversion of vapours into solid.
  4. Which one of the following techniques would best be used to separate soil and water? Which one of the following methods would NOT be used to separate an insoluble solid and a liquid evaporation The separation technique that involves heating a solution until the liquid changes into a gaseous state, leaving behind a solid is known as.
Single Displacement Reaction: Zinc and Copper(II) Ion

Which of the following is NOT an advantage of Solid State Hard drives? More Reliable Built in Raid Controller Generates less heat Faster. Jul 16 2021 04:56 PM A company is proposing a solution where they mix negative ions into the water to bond with the Pb+2 ions and form an insoluble solid that can be filtered out. Which of the following compounds contains ions that could be used in order to form a precipitate with lead

A blue solid X was dissolved in water and the solution divided into two portions. When a few drops of sodium hydroxide was added to the 1st portion, a blue gelatinous precipitate formed. When a few drops of dilute nitric acid, followed by a few drops of barium nitrate solution was added to the 2nd portion, a white precipitate formed Which of the following is/are correct regarding entropy? (A) The entropy of solution formed is higher if the detergent concentration is slightly less than CMO as compared to when its concentration is slightly more than CMC (B) The vapour pressure of a solution of 10 g protein molecules is expected to be more than that of 10 g urea molecules as entropy of urea solution is more Conversion of a solid to liquid by heating is called fusion. 7. Change of seasons is a natural change. 8. Pressure is equal to the force per unit second. We hope the given NCERT MCQ Questions for Class 6 Science Chapter 6 Changes Around Us with Answers Pdf free download will help you

A solution X was tested by a student in various ways with different materials. The following results were obtained. (1) Solution X gave no colour change with red litmus, but blue litmus turned red. (2) Solution X turned universal indicator solution from green to orange. (3) Solution X produced a slow 'fizzing' reaction with a marble chip Solid particles dispersed in a gas. Medium. Video Explanation. Answer. Correct option is . A. Liquid particles dispersed in a gas. Fog is a colloidal solution in which water (liquid, dispersed phase) is dispersed in the air (gas, dispersion medium). Answer verified by Toppr . Upvote (0) Was this answer helpful? Get Instant Solutions, 24x7 A colloid is a mixture in which one substance of microscopically dispersed insoluble particles are suspended throughout another substance. However, some definitions specify that the particles must be dispersed in a liquid, and others extend the definition to include substances like aerosols and gels.The term colloidal suspension refers unambiguously to the overall mixture (although a narrower.

You can refer to NCERT Solutions for Class 9 Science Chapter 2 Is Matter Around Us Pure to revise the concepts in the syllabus effectively and improve your chances of securing high marks in your board exams. Is Matter Around Us Class 9 MCQs Questions with Answers. Question 1. Which of the following statements are true for pure substances Carbon is an interstitial impurity in iron and forms a solid solution in alpha and delta phases. Different phase components are as follows: Ferrite: Pure iron contains 0.008% weight of carbon. Upon heating, pure iron experiences a change in crystal structure before it melts

A solid spherical ball of iron with radius 6 cm is melted and recast in to 3 solid spherical balls. The radii of the two of the balls are 3 cm and 4 cm respectively, then the diameter of the 3rd ball i Video Solution: Which of the following statements is/are true <br> (A) It the stem is jointed with solid nodes and hollow internodes, it is called caudex <br> (B) In Tridax the stem is decumbent <br> (C) Corn is a condensed form of rhizome growing more or less in vertical direction <br> (D) Sucker is an underground modification of stem <br> (E) Biparous type of cymose branching is seem in Saraca Which of the following is/are correct? (a) Nitric oxide in solid state exhibits diamagnetic property. (b) N. H. 3. is a weak reducing agent compared to. P Solution.pdf Next Previous. Related Questions. When you create a multi-section solid feature, the point from which you start drawing the sketch is. When you create a multi-section solid feature, the point from which you start drawing the sketch is selected by default as the closing point of the section. Which of the following is a Boolean.

Hume-Rothery rules - Wikipedi

The example of solid solution is - Toppr As

NCERT Exemplar Class 8 Maths Solutions Chapter 6

While solid-liquid and aqueous solutions comprise the majority of solutions encountered in the chemistry laboratory, it is important to be aware of the other possibilities. Figure \(\PageIndex{1}\): Large aquariums like this salt-water tank have air continually bubbled into the water so that the fish have enough dissolved oxygen to breathe 3 1. If the temperature of an aqueous solution of NaCl is increased from 20°C to 90°C, which of the following statements is true? (A) The density of the solution remains unchanged. (B) The molarity of the solution remains unchanged. (C) The molality of the solution remains unchanged. (D) The mole fraction of solute decreases Questions 1-3 refer to the following: Date Mr. D'Amico Review Sheet Alcohols are organic compounds containing a hydroxyl group. When a solution containing dichromate ions is added to most alcohols, chromium (Ill) ions are formed. The color of the solution changes from bright orange to green. CH3CH20H (1) + cr207 - (aq) CH3COOH (aq) + cr3+ (aq A non-aqueous solution is a solution in which water is not the solvent. Examples of non-aqueous solutions are solutions used in dry cleaning (a solution of ethene in the solvent dichloromethane). A solid solution is a solution in which a solid is the solvent. An example is a brass solution that is formed by dissolving copper in zinc

Solutions - ScienceQuiz

Which of the following statements is TRUE a The solubility of a solid is not from PHYSICS 2211 at Georgia State Universit C) solution D) colloid E) none of the above 41) What is the term for the component of a solution that is the greater quantity? A) secondary component B) solvent C) solute D) primary component E) none of the above 42) Which of the following illustrates the like dissolves like rule for a solid solute in a liquid solvent 2. Suppose a solid unknown is insoluble in water. Which of the following reagents would be useful in obtaining more information about the functional group in the unknown? a.6 M HCl solution b.3 M NaOH solution c. Dilute NH 3 solution d.More than one answer is correct. Explain your answer: Both A and B are used in the water-insoluble carboxylic acid, the aspirin from Alka-Seltzer tests; A is in. The following are statements about the dissolving process. Explain each one at the molecular level. a. Increasing the pressure of a solute gas above a liquid solution increases the solubility of the gas in the liquid. Increasing the pressure of the solute gas above the solution puts stress on the equilibrium of the system

Building Codes and Bulk Storage Silo Design | Powder/Bulk

What Are Examples of Solids in Gas Solutions

Which of the following substances is a compound? A

The solid waste management also offers solutions for recycling items that do not belong to trash or garbage. As long as the people have been living in residential areas and settlements, solid or garbage waste has been an issue. Waste management is all about how the solid waste can be converted and used as a valuable resource When all compositions between two end members are possible, the solid solution is said to be a complete solid solution. Another good example of a complete solid solution is displayed in the plagioclase feldspars. In this case the solid solution is between the end members albite (NaAlSi 3 O 8) and anorthite (CaAl 2 Si 2 O 8) Our videos prepare you to succeed in your college classes. Let us help you simplify your studying. If you are having trouble with Chemistry, Organic, Physics, Calculus, or Statistics, we got your back! Our videos will help you understand concepts, solve your homework, and do great on your exams Solution:(b) A solid is said to be crystalline if the various constituent structural units (atoms, ions or molecules) of which the solid is made, are arranged in a definite geometrical pattern within the solid. The type of forces in crystalline solids are of long range order due to which they have sharp melting point. . Question 8

Choose the most correct answer

Andesine - Wikipedia

MCQ Questions for Class 12 Chemistry Chapter 1 The Solid

Solubility is the property of a solid, liquid or gaseous chemical substance called solute to dissolve in a solid, liquid or gaseous solvent.The solubility of a substance fundamentally depends on the physical and chemical properties of the solute and solvent as well as on temperature, pressure and presence of other chemicals (including changes to the pH) of the solution NCERT 12 Chemistry Solutions for Class 12 Chapter 1 The Solid State includes all the important topics with detailed explanation that aims to help students to understand the concepts better. Students who are preparing for their Class 12 exams must go through Class 12 Chemistry NCERT Solutions Chapter 1 The Solid State.Going through the solutions provided on this page will help you to know how. NCERT Exemplar Class 7 Maths Book PDF Download Chapter 12 Practical Geometry Symmetry and Visualising Solid Shapes Solutions Multiple Choice Questions (MCQs) Question 1: A triangle can be constructed by taking its sides as (a) 1.8 cm, 2.6 cm, 4.4 cm (b) 2 cm, 3 cm, 4 cm (c) 2.4 cm, 2.4 cm, 6.4 cm [

Which of the following statements is true? A

Ideal solution, homogeneous mixture of substances that has physical properties linearly related to the properties of the pure components. The classic statement of this condition is Raoult's law, which is valid for many highly dilute solutions and for a limited class of concentrated solutions, namely, those in which the interactions between the molecules of solute and solvent are the same as. Class 9 Science Chapter 1 MCQ with Answers for 2021-22. Class 9 Science Chapter 1 MCQ Online Test with answers and explanation. All the questions are taken from intext and Exercises part of NCERT Books for class 9 Science issued for academic session 2021-2022. Explanation of answers will help you to understand questions in depth An emulsifier is a substance which. (a) stabilises the emulsion. (b) homogenises the emulsion. (c) Coagulates the emulsion. (d) Accelerates the disperson of liquid in liquid. Answer. Answer: a. Note: In the following questions two or more options may be correct. (Q.21 to Q.23 (b) An iron almirah is a solid' at room temperature due to following reasons : (i) An almirah has a fixed shape and a fixed volume. (ii) It cannot flow, hence it is rigid. Question 7. Why is ice at 273 K more effective in cooling than water at the same temperature? Solution The amount adsorbed per gram of solid depends on the specific area of the solid, the equilibrium solute concentration in the solution (or pressure in the case of adsorption from the gas phase), the temperature, and the nature of the molecules involved. From measurements at constant temperature, one can obtain a plot of N, the number of mole

Mitchells bathroom wall panels and worktops Southampton

IR Instrumentation Questions & Answers - Inst Tool

Statement 1: If temperature of a solid substance is increased, the force of attraction between its molecules will also increase Solute particles of true solution cannot be separated from the mixture by the process of filtration. done clear. D) Which one of the following will give a true solution when dissolved in water? A Choose the correct statement from the following: (a) Conversion of solid into vapour without passing through the liquid state is called vapourisation. (b) Conversion of vapour into solid without passing through the liquid state is called sublimation. (c) Conversion of vapour into solid without passing through the liquid state is called freezing Which of the following is an example of a precipitate? A liquid evaporating into gas B a solid formed from a frozen liquid C a chunky solid formed from two liquids combining D a liquid solution that contains two substance This area is the solution to the system of inequalities. Any point within this purple region will be true for both [latex]y>−x[/latex] and [latex]y<2x+5[/latex]. In the following video examples, we show how to graph a system of linear inequalities and define the solution region

Solved: Spes A2. Which Of The Following Is NOT A Factor Th ..

III. State which the following statements are true or false. If false give the correct statement. Supernatant denotes the heterogeneous mixture, lying above a solid residue, after crystallization, precipitation, centrifugation or other process - False Which of the following is an example of molecular solid? MHT CET. Online Tests 3. Question Bank Solutions 3274. Concept Notes 645. Syllabus. Advertisement Remove all ads. Which of the following is an example of molecular solid? CBSE Previous Year Question Paper With Solution for Class 12 Commerce Solution for 5. Which of the following gives the total length of cable? а. 29.48 m b. 24.26 m С. 20.26 m d. 32.21 m 6 m 7 m 11 m A B1 6 m В B2 16 kN 35° 20 k Which one of the following is wrong? (a) Oxygen and sulphur belong to the same group of periodic table (b) Oxygen is a gas while sulphur is solid (c) Both show $+2,+4$ and $+6$ oxidation states (d) $\mathrm{H}_{2} \mathrm{~S}$ has no hydrogen bonding. Answer. View Answer. Topics